Bulkhead (Subnautica): Difference between revisions

Revision as of 15:34, 28 April 2016

The Bulkhead is a Seabase module. It is constructed with the Habitat Builder and can only be placed inside seabases at the junction between two Corridors. The Bulkhead cannot be placed in the passages that are automatically built between two adjacent Multipurpose Rooms.

The Bulkhead increases integrity level by +2. The Bulkhead can stop flooding from going into another section of a base. ^[1]

How to use

Open Builder menu (RMB) and select Bulkhead.
Place it (Green ghost model will confirm placement).
Click on the door to open and close.
To remove it: Hold E to deconstruct.

Recipe

Gallery

Bulkhead Module with door closed
Front - Bulkhead Module
Back - Bulkhead Module with door open
Bulkhead Module viewed from the outside
Bulkhead Model from Sketchfab

References

↑ https://trello.com/c/ItP64H8x/4633-stop-flooding-with-bulkheads

Videos

File:Base Bulkheads

File:Bulkhead Exit Glitch

[1] ttps://trello.com/c/ItP64H8x/4633-stop-flooding-with-bulkheads

[1]

@@ Line 1: / Line 1: @@
 [[File:Bulkhead.png|thumb]]
-The '''Bulkhead''' is a [[Seabases|Seabase]] module. It is constructed with the [[Habitat Builder]] and can only be placed inside seabases at the junction between two modules.
+The '''Bulkhead''' is a [[Seabases|Seabase]] module. It is constructed with the [[Habitat Builder]] and can only be placed inside seabases at the junction between two [[corridor|Corridors]]. The '''Bulkhead''' cannot be placed in the passages that are automatically built between two adjacent [[Multipurpose Room|Multipurpose Rooms]].
 The '''Bulkhead''' increases integrity level by +2. The '''Bulkhead''' can stop flooding from going into another section of a base. <ref>https://trello.com/c/ItP64H8x/4633-stop-flooding-with-bulkheads</ref>